EVIC is a compact LCD color display with integrated CAN channel and digital and analog interfaces. EVIC can be configured to show a variety of data sets from battery management systems, motor controllers, chargers, and vehicle control units. EVIC includes the following features:
Active area (mm) 152.4(H)×91.4 (V)
|Display Resolution||800 x 480 WVGA|
|Input Voltage||9-36 VDC|
Configurable baud rates 125, 250, 500 kbps and 1Mbps
|CAN Isolation||2.5 kV RMS (ISO1050DUB)|
8, 18V tolerant inputs
8, 2A sinking outputs
|Analog Inputs||5, 12-bit resolution|
Custom boot screen logos and skin graphics
Studio Interface Kit (SIK) software tool for creating and updating HMI skin graphics
Software Development Kit (SDK) full customization and programming (available upon request)
Figure 1: Default User Interface
EVIC can be mounted onto a system using the 4 holes on the front bezel.
EVIC is packaged with automotive grade connectors.
Do not attempt to open the display as there are no serviceable components. Opening the display will invalidate the warranty.
Note: There are exceptions to terminate and not terminate CAN lines. Please discuss with Andromeda before removing back cover to access CAN termination.