...
To get started, wire Pins 1 and 3 (VBAT) to +12V or +24V and Pin 2 (GND) to Ground. Once power is applied, the default splash screen will be displayed, and will transition to the Graphical User Interfaces Interface (GUI) application.
Default Splash
...
The default splash screen is configurable. To replace the default splash screen image, Andromeda's Flasher Tool is available to make this change to replace the image.
...
Graphical User Interfaces
The start-up GUI will appear as shown below. These GUIs are configurable through our Studio Interface Kit (SIK).
...