The following procedure shall be used to load the necessary software to the workstation. The intent of these test steps are to ensure the workstation is set up appropriately with the software.

Sections

Install Flasher Tool to Workstation

1. Install the ADIM-Flasher tool onto your workstation.

2. Go through the setup wizard to successfully install it.

   Open

   

Install SIK to Workstation

1. Install the Studio Interface Kit onto your workstation.

2. Go through the setup wizard to successfully install it.

Open

3. Please review the EVIC Production Software page to review the variants to install for production.

Download All Kernel, Splash Screens and Application Software to Workstation

Vantage

Kernel:

NoHP_FlexCAN_125kpbs

Splash Screen:

boot_screen_image

Application Software:

vantage_release_2021 03 03_mph_vcl_high_beam_change

Moxion

Kernel:

MassHP_FlexCAN_500kpbs

Splash Screen:

boot_screen_image

Application Software:

moxion_hmi

EVIC

Kernel:

MassHP_FlexCAN_250kpbs

Splash Screen:

boot_screen_image

Application Software:

Is built into SIK, no need to download anything extra.