The following procedure shall be used to load the necessary software to the workstation. The intent of these test steps are to ensure the workstation is set up appropriately with the software.

Sections

Install Flasher Tool to Workstation

1. Install the ADIM-Flasher tool onto your workstation.

2. Go through the setup wizard to successfully install it.

   

Install SIK to Workstation

1. Install the Studio Interface Kit onto your workstation.

2. Go through the setup wizard to successfully install it.

Download Kernels, Splash Screens and Application Software for Each Variant:

Vantage Vehicle:

Vantage Vehicle Production Kernel:

NoHP_FlexCAN_125kpbs

Vantage Vehicle Production Splash Screen:

boot_screen_image

Vantage Vehicle Production Application Software:

vantage_release_2021 03 03_mph_vcl_high_beam_change

Moxion:

Moxion Kernel:

MassHP_FlexCAN_500kpbs

Moxion Splash Screen:

boot_screen_image

Moxion Application Software:

moxion_hmi

EVIC:

EVIC Kernel:

MassHP_FlexCAN_250kpbs

EVIC Splash Screen:

boot_screen_image

Application Software: (Included with SIK Download)

Use the SIK’s Wizardy tool and select the following skin settings:

1. Select EVIC 7” for Devic type

2. Select Orion + Curtis AC1239 for Interfaces

3. Select 250kpbs for CAN baud rates

4. Select EVIC Combo Skin 2 for skin type

5. Press SKIN IT