Introduction
SIK has pre-defined skin graphics established to help get started. You can access these skin graphics by using the 'Wizardy' tool.
Video Overview:
View file |
---|
name | SIK_Getting_Started.mp4 |
---|
height | 400 |
---|
|
...
Tip |
---|
|
The following steps are necessary for programming Intelli-Gauge with the USB cable provided in the 12-pin harness. - Power OFF (no 12v)
- Plug-in USB cable to workstation/laptop
- Power ON (12v)
- Once Wait for IG completes to complete the boot process the display will get detected as a USB devicebefore plugging in the USB cable
- Plugin the USB cable to the workstation/laptop
- SIK shall detect IG and enable the "Skin Flash" button
|
Tip |
---|
|
If the files do not transfer successfully to the display, the NAND flash may have corrupted. You can recover the NAND flash on the display by reformatting it. - With the display plugged in through USB, go to Windows Explorer and look for the display's USB drive. You can right-click on the drive and select “Format”.
- A new window will appear allowing you to perform the format.
1) Display USB Drive (NAND)
2) Format USB Drive (NAND)
|
...