Versions Compared

Old Version 43

changes.mady.by.user AI-JEDI

Saved on

compared with

New Version 44

changes.mady.by.user AI-JEDI

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Introduction

SIK has pre-defined skin graphics established to help get started. You can access these skin graphics by using the 'Wizardy' tool. 

Video Overview:

View file
nameSIK_Getting_Started.mp4
height400

...

3. After skin flashing has completed, a message box will appear indicating the status of the update. If successful, you can "UNPLUG" the USB cable from your HMI display and cycle power "OFF" and "ON".


Tip
titleSIK Flashing

 In the event the files do not transfer successfully to the display, the NAND flash may be corrupted. You can recover the NAND flash on the display by reformatting it.

  1. With the display plugged in through USB, go to Windows Explorer and look for the display's USB drive. You can right-click on the drive and select “Format”.
  2. A new window will appear allowing you to perform the format.

1) Display USB Drive (NAND)

Image Added

2) Format USB Drive (NAND)

Image Added