ATDM - Technical Manual

Owned by AI-JEDI
Last updated: Mar 30, 2024
1 min read

This version of the manual

This version of ATDM's manual replaces all previous versions.  Andromeda has made every effort to ensure this document is complete and accurate when printing. In accordance with our policy of continuing product improvement, all data in this document is subject to change without prior notice.

This manual is copyrighted 2024 by Tech/Ops Andromeda Interfaces, Inc. All rights are reserved. This manual may not be copied in whole or in part, nor transferred to any other media or language, without the express written permission of Tech/Ops Andromeda Interfaces, Inc.

Scope of this manual

This manual provides information on how to set up and perform development with ATDM. 

Warnings, Cautions, and Notes:

Special attention must be paid to the information presented in Warning, Cautions, and Notes when it appears in this manual.  Examples of the style and purpose of each are shown below.

 

A WARNING is an instruction that draws attention to the risk of injury and tells you how to avoid the problem.

A CAUTION is an instruction that draws attention to the risk of damage to the product, process, or surroundings.

A NOTE indicates important information that helps you make better use of your Andromeda product.

Product Identification label

When discussing technical issues with Andromeda Interfaces, always have your product's Part number and Serial number (if applicable) available.

Technical Support

For technical queries and application engineering support on ATDM or any other Andromeda product, please get in touch with Andromeda Interfaces. Alternatively, you can submit inquiries through the Andromeda Interfaces website, www.ai-hmi.com.