1 - Overview ATDM

Sections in this page:

Features and Capabilities

Andromeda's Advanced Telematics Display Module (ATDM) is an automotive-grade display device with integrated telematics. ATDM can be configured as either a headless (without display) or headed device to perform both real-time updates and remote monitoring services.

ATDM includes the following:

Features
Display Size

Diagonal 10.1" Active area (mm) 152.5(H) x 91.4 (V)

Display Resolution

1280x800 WXGA

Display Brightness

850 cd/m2

TouchPCAP Multi-touch capacitive 
CAN Channels

2x Configurable baud rates 125, 250, 500 kbps and 1Mbps

2.5 kV RMS (ISO1050DUB)

Digital I/O

8, Digital Outputs (High Side)

12, Digital Inputs

Analog Inputs6, Analog Inputs
CellularmPCIE for cellular modem (tested with Quectel EG25), Nano SIM
Interface

35-pin Ampseal for Power, CAN and I/O

14-pin Ampseal for additional outputs + video and audio

GPS, WiFi, Bluetooth 5.2, 2x Ethernet (MX12-X connector), Analog Video Input, USB-C
Development Environment

Embedded Linux, Android and QNX

Studio Interface Kit (SIK) software tool for creating and updating HMI skin graphics

Processor

i.MX8QuadMax with 4GB LPDDR4 RAM and 32GB eMMC Flash

Operating/Storage Temperature

-30oC to +85oC

-40oC to +85oC

Input Voltage

+12V to +24V DC Nominal

+7-27V absolute with limiting and reverse polarity protection

Storage

uSD

Housing

Aluminum 6061-T6

Mechanical Package

      

                          ISO Rear View - ATDM                                                      ISO Front View - ATDM                                                       

Available Accessories

The following accessories are available from Andromeda Interfaces:

  • Assembled development harnesses
  • LTE cellular modem cards

General:

Opening ATDM shall only be necessary to swap SIM cards, SD cards or access USB-C. Please take extreme caution while performing these tasks.