...
Terminals: Molex part number 1393367-1
J4 - Mini-B USB Connector - Programming cable used for SIK
The cable is provided with the purchase of EVIC.
Harness Connections
| J1 - MAIN CONNECTOR PINOUT | ||||
PIN | Name | Type | What to Connect | Maximum Rating |
1 | +12V POWER | Power | Constant power source | +32V |
2 | GND | Power | Power source return | - |
3 | IGN | Power | Switch power | +32V |
4 | CAN_HIGH | Comm | CAN High | - |
5 | CAN_LOW | Comm | CAN Low | - |
6 | DIN 7 | Digital Input | Switches, buttons | +18V |
7 | DIN 6 | Digital Input | Switches, buttons | +18V |
8 | DIN 1 | Digital Input | Switches, buttons | +18V |
9 | DIN 2 | Digital Input | Switches, buttons | +18V |
10 | DIN 3 | Digital Input | Switches, buttons | +18V |
11 | DIN 4 | Digital Input | Switches, buttons | +18V |
12 | DIN 5 | Digital Input | Switches, buttons | +18V |
13 | RXD_EXT | Comm | RS-232 (diag only) | |
14 | TXD_EXT | Comm | RS-232 (diag only) | |
15 | RTS_EXT | Comm | RS-232 (diag only) | - |
16 | CTS_EXT | Comm | RS-232 (diag only) | |
17 | DIN 8 | Digital Input | Switches, buttons | +18V |
18 | AIN_5_Signal | Analog Input | Sensor signal | +5V |
19 | BOOT 1 | Boot Mode | Short Pins 19 and 20 to place EVIC into boot mode | |
20 | BOOT 2 | Boot Mode | Short Pins 19 and 20 to place EVIC into boot mode | |
| J2 - ANALOG INPUT CONNECTOR PINOUT | ||||
| Pin | Name | Type | What to Connect | Rating |
|---|---|---|---|---|
1 | AIN_1_Signal | Analog Input | Sensor signal | +5V |
| 2 | AIN_1_Reference | Power | 5V power output | - |
| 3 | AIN_1_Ground | Power | 5V reference ground | - |
| 4 | AIN_2_Signal | Analog Input | Sensor signal | +5V |
| 5 | AIN_2_Reference | Power | 5V power output | - |
| 6 | AIN_2_Reference | Power | 5V reference ground | - |
| 7 | AIN_3_Signal | Analog Input | Sensor signal | +5V |
| 8 | AIN_3_Reference | Power | 5V power output | - |
| 9 | AIN_3_Reference | Power | 5V reference ground | - |
| 10 | AIN_4_Signal | Analog Input | Sensor signal | +5V |
| 11 | AIN_4_Reference | Power | 5V power output | - |
| 12 | AIN_4_Reference | Power | 5V reference ground | - |
| J3 - DIGITAL OUTPUT CONNECTOR PINOUT | ||||
| Pin | Name | Type | What to Connect | Rating |
|---|---|---|---|---|
| 1 | DOUT_1 | Digital Output | LED's, Relays, Buzzers | 2A |
| 2 | DOUT_2 | Digital Output | LED's, Relays, Buzzers | 2A |
| 3 | DOUT_3 | Digital Output | LED's, Relays, Buzzers | 2A |
| 4 | DOUT_4 | Digital Output | LED's, Relays, Buzzers | 2A |
| 5 | DOUT_5 | Digital Output | LED's, Relays, Buzzers | 2A |
| 6 | DOUT_6 | Digital Output | LED's, Relays, Buzzers | 2A |
| 7 | DOUT_7 | Digital Output | LED's, Relays, Buzzers | 2A |
| 8 | DOUT_8 | Digital Output | LED's, Relays, Buzzers | 2A |
| 9 | GND | Power | Power source return | - |
| 10 | GND | Power | Power source return | - |
| 11 | GND | Power | Power source return | - |
| 12 | GND | Power | Power source return | - |
Interfaces
Digital Inputs
...